FR4 TG150 PCB Board laba-geesood oo wareeg ah oo leh dahab adag 3u" iyo Counter sink/bore
Macluumaadka aasaasiga ah
| Qaabka No. | PCB-A34 |
| Xidhmada gaadiidka | Xirmooyinka vacuum |
| Shahaado | UL,ISO9001&ISO14001,RoHS |
| Codsiga | Elektrooniga macaamiisha |
| Meesha ugu yar/khadka | 0.075mm/3mil |
| Awood-soo-saarka | 50,000 sqm/bishii |
| Koodhka HS | 853400900 |
| Asal ahaan | Lagu sameeyay Shiinaha |
Sharaxaada Alaabta
FR4 PCB Hordhac
FR macneheedu waa "holac-dejinta," FR-4 (ama FR4) waa calaamadda NEMA ee loogu talagalay walxaha laminate ee la xoojiyay muraayadda epoxy, walxo isku dhafan oo ka kooban maro fiberglass ah oo leh xiraha epoxy resin kaaso ka dhigaya mid ku habboon qaybaha elektaroonigga ah. sabuurad wareeg ah oo daabacan.
Faa'iidooyinka iyo khasaaraha FR4 PCB
Qalabka FR-4 waa mid caan ah sababtoo ah tayada badan ee cajiibka ah ee ka faa'iideysan kara looxyada wareegyada daabacan.Marka laga soo tago inay tahay mid la awoodi karo oo ay fududahay in lagu shaqeeyo, waa dahaye koronto oo leh awood koronto oo aad u sareysa.Waxaa dheer, waa mid waara, qoyaan u adkaysta, heerkulka u adkaysta oo fudud.
FR-4 waa walxo si ballaaran loo isticmaalo, caan ku ah inta badan qiimaheeda hoose iyo xasilloonida makaanikada iyo korantada.Inkasta oo maaddadani ay leedahay faa'iidooyin ballaadhan oo lagu heli karo dhumucyo iyo cabbirro kala duwan, maaha doorashada ugu fiican ee codsi kasta, gaar ahaan codsiyada soo noqnoqda sida RF iyo naqshadaha microwave.
Qaab dhismeedka PCB-da lakabka badan
PCB-yada Multilayer waxay sii kordhiyaan kakanaanta iyo cufnaanta naqshadaha PCB iyagoo ku daraya lakabyo dheeraad ah oo ka baxsan lakabyada sare iyo hoose ee lagu arkay looxyo laba dhinac ah.PCB-yada Multilayer waxaa lagu dhisay iyadoo la saarayo lakabyada kala duwan.Lakabyada gudaha, sida caadiga ah looxyada wareega ee laba-geesoodka ah, waa la is dulsaaray, oo leh lakabyo dahaadh ah oo u dhexeeya iyo inta u dhaxaysa naxaasta-foil-ka ee lakabyada dibadda.Godad laga dhex qoday looxa (vias) waxa ay xidhiidh la samayn doonaan lakabyada kala duwan ee looxa.
Farsamo & Karti
| ITEM | AWOODDA | ITEM | AWOODDA |
| Lakabyo | 1-20L | Copper ka dhumuc weyn | 1-6OZ |
| Nooca Alaabta | HF(Soo noqnoqoshada Sare) &(Soo noqnoqoshada Raadiyaha) looxa, looxa kontoroolka Imedance, HDIboard, BGA & guddiga Fine Pitch | Maaskarada Alxanka | Nanya & Taiyo;LRI & Matt Cas.cagaar, jaalle, caddaan, buluug, madow |
| Qalabka saldhigga ah | FR4 (Shengyi Shiinaha, ITEQ, KB A +, HZ), HITG, FrO6, Rogers, Taconic, Argon, Nalco lsola iyo wixii la mid ah | Dusha la dhameeyay | HASL caadiga ah, HASL-free-Lead-free,FlashGold,ENIG (lmmersion Gold) OSP (Entek), lmmersion TiN, lmmersion Silver, Dahab adag |
| Daaweynta dusha sare ee xulashada | ENIG(Dahab immersion) + OSP ,ENIG(Dahab immersion) | ||
| Tilmaamaha Farsamada | Ballaca xariiqda ugu yar: 3.5/4mil Cabbirka daloolka ugu yar: 0.15mm Giraanta Sannadlaha ee Ugu Yar: 4mil Dhumucda ugu badan ee Copper: 6Oz Cabbirka ugu badan ee wax soo saarka: 600x1200mm Dhumucda looxa: D/S: 0.2-70mm, Mulltilayers: 0.40-7.Omm Min Alxanka Maaskarada: ≥0.08mm Saamiga dhinaca: 15:1 Ku-xidhka awoodda: 0.2-0.8mm | ||
| Dulqaad | Dulalka dahaaran Dulqaadashada: ± 0.08mm (min± 0.05) Dul-qaadka aan dahaadhka lahayn: ±O.05min(min+O/-005mm or +0.05/Omm) Dulqaadka dulucda: ± 0.15min(min±0.10mm) Imtixaan shaqaynaya: caabbinta lnsulating: 50 ohms (caadiga ah) Ka saar xoogga: 14N/mm Tijaabada Cadaadiska kulaylka: 265C.20 ilbiriqsi Maaskarada adkaanta: 6H E-tijaabo danab: 50ov± 15/-0V 3os Warp and Twist: 0.7% (semiconductor test board 0.3%) | ||
Xagee bay ka yimaadaan walxaha resin ee ABIS?
Badi iyaga oo ka socda Shengyi Technology Co., Ltd. (SYTECH), kuwaas oo ahaa soo saaraha labaad ee CCL ee ugu weyn adduunka marka loo eego mugga iibka, laga bilaabo 2013 ilaa 2017. Waxaan aasaasay xiriirka muddada dheer ee iskaashiga ilaa 2006. Qalabka resin FR4 (Model S1000-2, S1141, S1165, S1600) ayaa inta badan loo isticmaalaa samaynta loox wareegyada daabacan oo hal iyo laba-dhinac ah iyo sidoo kale loox-lakabyo badan.Halkan waxaa ku qoran faahfaahinta tixraacaada.
Loogu talagalay FR-4: Sheng Yi, King Board, Nan Ya, Polycard, ITEQ, ISOLA
Loogu talagalay CEM-1 & CEM 3: Sheng Yi, King Board
Soo noqnoqoshada Sare: Sheng Yi
Daawada UV: Tamura, Chang Xing (* Midabka la heli karo: Cagaaran) Alxanka dhinaca
Sawirka dareeraha ah: Tao Yang, iska caabin (filimka qoyan)
Chuan Yu (* La heli karomidabada: Caddaan, Jaalle Alxan la malaysan karo, Purple, Casaan, Buluug, Cagaar, Madow)
Habka Waxsoosaarka PCB
Nidaamku wuxuu ka bilaabmaa qaabaynta Qaabka PCB-ga iyadoo la adeegsanayo barnaamij kasta oo PCB nashqadeynaya / Qalabka CAD (Proteus, Eagle, Ama CAD).
Dhammaan tallaabooyinka soo haray waa Habka Wax-soo-saarka ee Guddiga Wareegga Daabacan ee Adag waxay la mid yihiin PCB-ga Hal dhinac ah ama PCB-ga laba-geesoodka ah ama PCB-da lakabka badan.
Wakhtiga Hogaaminta Q/T
| Qaybta | Waqtiga Hogaaminta ugu Dhakhsaha badan | Waqtiga Hogaaminta Caadiga ah |
| Laba-dhinac | 24 saac | 120 saac |
| 4 Lakabyo | 48 saac | 172 saac |
| 6 Lakabyo | 72 saac | 192 saac |
| 8 Lakabyo | 96 saac | 212 saac |
| 10 Lakab | 120 saac | 268 saac |
| 12 lakab | 120 saac | 280 saac |
| 14 Lakab | 144 saac | 292 saac |
| 16-20 lakab | Waxay kuxirantahay shuruudaha gaarka ah | |
| In ka badan 20 lakab | Waxay kuxirantahay shuruudaha gaarka ah | |
Dhaqdhaqaaqa ABIS ee lagu xakameynayo FR4 PCBS
Diyaarinta godka
Ka-saarista qashinka si taxadar leh & hagaajinta cabbirada mishiinka: ka hor inta aanad ku dhejin naxaas, ABIS waxay si taxadar leh u fiirisaa dhammaan godadka FR4 PCB ee lagu daweeyey si looga saaro qashinka, cilladaha dusha sare, iyo smear epoxy, godadka nadiifka ah waxay hubiyaan in dahaadhku si guul leh ugu dheggan yahay derbiyada daloolka. .sidoo kale, horraantii habka, cabbirada mishiinka daloolka ayaa si sax ah loo hagaajiyaa.
Diyaarinta Dusha sare
Si taxaddar leh uga-hortagga: Shaqaalaheenna tignoolajiyada khibradda leh waxay ogaan doonaan waqti ka hor in habka kaliya ee looga fogaado natiijada xun ay tahay in la saadaaliyo baahida loo qabo maaraynta gaarka ah iyo in la qaado tillaabooyinka ku habboon si loo hubiyo in habka loo sameeyay si taxadar leh oo sax ah.
Heerarka Balaadhinta kulaylka
Caadada u ah wax ka qabashada walxaha kala duwan, ABIS waxay awood u yeelan doontaa inay falanqeyso isku darka si loo hubiyo inay ku habboon tahay.ka dib ilaalinta isku halaynta muddada dheer ee CTE (isku-dhafka balaadhinta kulaylka), iyada oo CTE-da hoose, ay yar tahay suurtogalnimada in godadka lagu dhejiyo ay ku guuldareystaan dabacsanaanta soo noqnoqda ee naxaasta taasoo sameysa isku xirnaanta lakabka gudaha.
Cabbiraadda
Xakamaynta ABIS wareegga wareegga waxaa lagu kordhiyey boqolleyda la og yahay iyadoo la filayo khasaarahan si ay lakabyadu ugu soo noqdaan cabbirkooda sidii loo qaabeeyey ka dib marka wareegga lamination la dhammeeyo.sidoo kale, iyadoo la adeegsanayo talooyinka cabbiraadda aasaasiga ah ee saaraha laminateerka oo ay weheliso xogta habraaca tirakoobka ee guriga dhexdiisa, si loo garaaco qodobbada cabbirka ee socon doona muddo ka dib gudaha deegaanka wax soo saarka ee gaarka ah.
Makiinada
Marka la gaaro wakhtiga lagu dhisayo PCB-gaaga, ABIS iska hubi inaad dooratay inaad haysato qalabka saxda ah iyo waayo-aragnimada aad si sax ah ugu soo saari karto isku dayga ugu horreeya.
Hadafka tayada ABIS
Heerka gudbinta walxaha soo galaya ayaa ka sarreeya 99.9%, tirada diidmada guud ee ka hooseeya 0.01%.
Xarumaha ABIS ee la shaabadeeyay waxay xakameeyaan dhammaan hababka muhiimka ah si loo baabi'iyo dhammaan arrimaha suurtagalka ah ka hor inta aan la soo saarin.
ABIS waxay isticmaashaa software horumarsan si ay u samayso falanqayn ballaaran oo DFM ah oo ku saabsan xogta soo socota, waxayna isticmaashaa nidaamyada xakamaynta tayada horumarsan inta lagu jiro habka wax soo saarka.
ABIS waxay qabataa 100% muuqaal iyo kormeer AOI iyo sidoo kale samaynta tijaabinta korantada, tijaabinta tamarta sare, tijaabinta xakamaynta impedance, qayb yar oo ka mid ah, tijaabinta shoogga kulaylka, tijaabinta alxanka, tijaabinta isku halaynta, tijaabinta caabbinta dahaarka iyo tijaabada nadaafadda ionic.
Shahaado
Maxaa noo doortay?
- Euipment-dhamaadka sare-xawaaraha sare ee Soo-qaad iyo Meelaynta Mashiinnada kuwaas oo farsamayn kara ilaa 25,000 qaybaha SMD saacaddii
- Awood tayo sare leh oo tayo sare leh 60K Sqm bishiiba-Waxay bixisaa mugga hoose iyo wax soo saarka PCB-da ee baahida loo qabo, sidoo kale wax soo saar ballaaran
- Kooxda injineernimada xirfadlayaasha-40 injineerada iyo gurigooda qalabaynta, xoog leh OEM.Waxay bixisaa laba ikhtiyaar oo fudud: Aqoonta gaarka ah iyo Heerka-Qoto dheer ee IPC Class II iyo III Heerarka
Waxaan siinaa adeeg EMS ah oo furaha furaha ah macaamiisha doonaya inaan ku ururinno PCB-ga PCBA, oo ay ku jiraan prototypes, mashruuca NPI, mugga yar iyo midka dhexe.Waxaan sidoo kale awoodnaa inaan ka soo saarno dhammaan qaybaha mashruucaaga isku-xidhka PCB.Injineeradayada iyo kooxda wax-soo-saarka waxay leeyihiin waayo-aragnimo qani ah oo ku saabsan silsiladda sahayda iyo warshadaha EMS, oo leh aqoon qoto dheer oo ku jirta golaha SMT oo u oggolaanaya inay xalliyaan dhammaan arrimaha wax soo saarka.Adeegeenu waa mid kharash-ool ah, dabacsanaan, oo la isku halayn karo.Waxaan ku qanacnay macaamiisha warshado badan oo ay ku jiraan caafimaadka, warshadaha, baabuurta iyo elektiroonigga macaamiisha.
FAQ
Si loo xaqiijiyo xigasho sax ah, hubi inaad ku darto macluumaadka soo socda mashruucaaga:
Buuxi faylasha GERBER oo ay ku jiraan liiska BOM
l Tirada
l Wakhtiga beddelka
l Shuruudaha Gudbinta
l Shuruudaha Agabka
l Dhamaystir shuruudaha
Qiimahaada gaarka ah waxaa lagu soo gudbin doonaa 2-24 saacadood oo kaliya, iyadoo ku xidhan kakanaanta naqshadaynta.
Lagu hubiyay 12 saacadood gudahoodMarka la hubiyo su'aasha Engineerka iyo faylka shaqada, waxaan bilaabi doonaa wax soo saarka.
Maya, ma aqbali karno faylalka sawirka, haddii aadan haysan faylka gerber, ma noo soo diri kartaa muunad si aan u koobiyeeyo.
Habka koobiga PCB&PCBA：
Hababkayada Hubinta Tayada sida hoos ku qoran:
a), Kormeerka muuqaalka
b), Baadhitaanka duulista, qalabka lagu rakibo
c) Xakamaynta dhibka
d) Ogaanshaha kartida alxanka
e).
f), AOI (Baaritaanka Indhaha oo Toomaatig ah)
Haa, waanu ku faraxsanahay inaanu bixino muunada moduleka si aanu u tijaabino una hubino tayada, dalabka muunad isku dhafan ayaa diyaar ah.Fadlan ogow iibsadaha waa inuu bixiyaa kharashka dhoofinta.
Heerka gaarsiinta waqtiga ayaa ka badan 95%
a), 24 saacadood oo degdeg ah u leexo labada dhinac ee PCB
b), 48 saacadood 4-8 lakab oo ah nooca PCB
c), 1 saac oo xigasho
d), 2 saacadood oo loogu talagalay su'aalaha injineernimada / jawaab celinta cabashada
e), 7-24 saacadood ee taageerada farsamada/dalabka adeegga / hawlgallada wax soo saarka
ABlS waxay qabataa 100% muuqaal iyo kormeer AOl iyo sidoo kale samaynta tijaabinta korantada, tijaabinta korantada sare, tijaabinta xakamaynta impedance, qaybta-yaraha, tijaabada shoogga kulaylka, tijaabada alxanka, tijaabinta isku halaynta, tijaabinta iska caabbinta, tijaabinta nadaafadda ioniciyo PCBA functional test.
| Awoodda wax soo saarka ee alaabta iibka kulul | |
| Aqoon-is-weydaarsiga PCB-ga ee laba-geesoodka ah | Aluminium PCB Workshop |
| Karti Farsamo | Karti Farsamo |
| Qalabka ceeriin: CEM-1, CEM-3, FR-4 (High TG), Rogers, TELFON | Qalabka ceeriin: Saldhig aluminium, saldhigga naxaasta |
| Lakab: 1 lakab ilaa 20 lakab | Lakabka: 1 lakab iyo 2 lakab |
| Balaadhka khadka ugu yar: 3mil/3mil(0.075mm/0.075mm) | Balaadhka khadka ugu yar: 4mil/4mil(0.1mm/0.1mm) |
| Daloolkii ugu yaraa: 0.1mm (dalool dalool) | Min.Cabbirka daloolka: 12mil (0.3mm) |
| Max.Cabbirka looxa: 1200mm* 600mm | Cabbirka ugu sarreeya: 1200mm* 560mm(47in* 22in) |
| Dhumucdiisuna waxay dhammaatay: 0.2mm- 6.0mm | Dhumucdiisuna waxay dhammaatay: 0.3 ~ 5mm |
| Dhumucdiisuna waxay tahay xaashida naxaasta ah: 18um ~ 280um (0.5oz ~ 8oz) | Dhumucdiisuna waxay tahay 35um ~ 210um (1oz ~ 6oz) |
| Dulqaadka NPTH: +/- 0.075mm, Dulqaadka PTH: +/- 0.05mm | Dulqaadka booska daloolka: +/- 0.05mm |
| Dulqaadka dulucda: +/- 0.13mm | Dulqaadka dulsaarka dariiqa: +/ 0.15mm;Dulqaadka dulucda feerka:+/ 0.1mm |
| Dusha sare ayaa dhammaatay: HASL-ka-free-lead, Dahab immersion(ENIG), qalin immersion, OSP, dahaadh dahab ah, far dahab ah, Kaarboon INK. | Dusha sare ayaa dhammaatay: HASL bilaash ah, dahab immersion (ENIG), qalin immersion, OSP iwm |
| Dulqaadka xakamaynta xakamaynta: +/- 10% | U dulqaadashada dhumucda hadhaa: +/- 0.1mm |
| Awood wax soo saar: 50,000 sqm / bishii | Awoodda Wax-soo-saarka MC PCB: 10,000 sqm/bishii |
a), Xigasho 1 saac ah
b), 2 saacadood oo jawaab celin cabasho ah
c), 7*24 saac taageero farsamo
d), 7*24 adeeg dalbashada
e), 7*24 saac gaarsiinta
f),7*24 wax soo saar
a), Xigasho 1 saac ah
b), 2 saacadood oo jawaab celin cabasho ah
c),7*24 saac taageero farsamo
d),7*24 adeeg dalbashada
e),7*24 saac gaarsiinta
f),7*24 wax soo saar
