4oz Multilayer FR4 PCB Board ee ENIG oo loo isticmaalo Warshadaha Tamarta oo leh IPC Class 3
Macluumaadka wax soo saarka
| Qaabka No. | PCB-A9 |
| Xidhmada gaadiidka | Xirmooyinka vacuum |
| Shahaado | UL,ISO9001&ISO14001,RoHS |
| Codsiga | Elektrooniga macaamiisha |
| Meesha ugu yar/khadka | 0.075mm/3mil |
| Awood-soo-saarka | 50,000 sqm/bishii |
| Koodhka HS | 853400900 |
| Asal ahaan | Lagu sameeyay Shiinaha |
Sharaxaada Alaabta
FR4 PCB Hordhac
Qeexid
FR macneheedu waa "holac-dejinta," FR-4 (ama FR4) waa calaamadda NEMA ee loogu talagalay walxaha laminate ee la xoojiyay muraayadda epoxy, walxo isku dhafan oo ka kooban maro fiberglass ah oo leh xiraha epoxy resin kaaso ka dhigaya mid ku habboon qaybaha elektaroonigga ah. sabuurad wareeg ah oo daabacan.
Faa'iidooyinka iyo khasaaraha FR4 PCB
Qalabka FR-4 waa mid caan ah sababtoo ah tayada badan ee cajiibka ah ee ka faa'iideysan kara looxyada wareegyada daabacan.Marka laga soo tago inay tahay mid la awoodi karo oo ay fududahay in lagu shaqeeyo, waa dahaye koronto oo leh awood koronto oo aad u sareysa.Waxaa dheer, waa mid waara, qoyaan u adkaysta, heerkulka u adkaysta oo fudud.
FR-4 waa walxo si ballaaran loo isticmaalo, caan ku ah inta badan qiimaheeda hoose iyo xasilloonida makaanikada iyo korantada.Inkasta oo maaddadani ay leedahay faa'iidooyin ballaadhan oo lagu heli karo dhumucyo iyo cabbirro kala duwan, maaha doorashada ugu fiican ee codsi kasta, gaar ahaan codsiyada soo noqnoqda sida RF iyo naqshadaha microwave.
Qaab dhismeedka PCB-da lakabka badan
PCB-yada Multilayer waxay sii kordhiyaan kakanaanta iyo cufnaanta naqshadaha PCB iyagoo ku daraya lakabyo dheeraad ah oo ka baxsan lakabyada sare iyo hoose ee lagu arkay looxyo laba dhinac ah.PCB-yada Multilayer waxaa lagu dhisay iyadoo la saarayo lakabyada kala duwan.Lakabyada gudaha, sida caadiga ah looxyada wareega ee laba-geesoodka ah, waa la is dulsaaray, oo leh lakabyo dahaadh ah oo u dhexeeya iyo inta u dhaxaysa naxaasta-foil-ka ee lakabyada dibadda.Godad laga dhex qoday looxa (vias) waxa ay xidhiidh la samayn doonaan lakabyada kala duwan ee looxa.
Farsamo & Karti
| Shayga | Awood-soo-saarka |
| Tirada lakabka | 1-20 lakab |
| Qalab | FR-4, CEM-1/CEM-3, PI, High Tg, Rogers, PTEF, Alu/Cu Base, iwm |
| Dhumucda looxa | 0.10mm-8.00mm |
| Cabirka ugu badan | 600mmX1200mm |
| Dulqaadka dulucda guddiga | +0.10mm |
| Dulqaadka Dhumucda (t≥0.8mm) | ± 8% |
| Dulqaadashada Dhumucda (t<0.8mm) | ± 10% |
| Dhumucda lakabka dahaarka | 0.075mm--5.00mm |
| Khadka ugu yar | 0.075mm |
| Meesha ugu yar | 0.075mm |
| Lakabka ka baxay Dhumucda Copper | 18um--350um |
| Lakabka Gudaha Dhumucda Naxaasta | 17um--175um |
| Daloolka Qodista ( Makaanikada) | 0.15mm--6.35mm |
| Dhammaystirka Godka ( Makaanikada) | 0.10mm-6.30mm |
| Dulqaadka Dhexroorka (Mashiinka) | 0.05mm |
| Diiwaangelinta | 0.075mm |
| Saamiga dhinaca | 16:1 |
| Nooca Maaskarada Alxan | LPI |
| SMT Mini.Balacda Maaskarada Alxan | 0.075mm |
| MiniNadiifinta Maaskarada Alxan | 0.05mm |
| Dhererka godka | 0.25mm--0.60mm |
| Dulqaadashada xakamaynta caqabada | ± 10% |
| Dhammaadka/daawaynta dusha sare | HASL, ENIG, Chem, Tin, Flash Gold, OSP, Far dahab ah |
Wakhtiga Hogaaminta Q/T
| Qaybta | Waqtiga Hogaaminta ugu Dhakhsaha badan | Waqtiga Hogaaminta Caadiga ah |
| Laba-dhinac | 24 saac | 120 saac |
| 4 Lakabyo | 48 saac | 172 saac |
| 6 Lakabyo | 72 saac | 192 saac |
| 8 Lakabyo | 96 saac | 212 saac |
| 10 Lakab | 120 saac | 268 saac |
| 12 lakab | 120 saac | 280 saac |
| 14 Lakab | 144 saac | 292 saac |
| 16-20 lakab | Waxay kuxirantahay shuruudaha gaarka ah | |
| In ka badan 20 lakab | Waxay kuxirantahay shuruudaha gaarka ah | |
Dhaqdhaqaaqa ABIS ee lagu xakameynayo FR4 PCBS
Diyaarinta godka
Ka-saarista qashinka si taxadar leh & hagaajinta cabbirada mishiinka: ka hor inta aanad ku dhejin naxaas, ABIS waxay si taxadar leh u fiirisaa dhammaan godadka FR4 PCB ee lagu daweeyey si looga saaro qashinka, cilladaha dusha sare, iyo smear epoxy, godadka nadiifka ah waxay hubiyaan in dahaadhku si guul leh ugu dheggan yahay derbiyada daloolka. .sidoo kale, horraantii habka, cabbirada mishiinka daloolka ayaa si sax ah loo hagaajiyaa.
Diyaarinta Dusha sare
Si taxaddar leh uga-hortagga: Shaqaalaheenna tignoolajiyada khibradda leh waxay ogaan doonaan waqti ka hor in habka kaliya ee looga fogaado natiijada xun ay tahay in la saadaaliyo baahida loo qabo maaraynta gaarka ah iyo in la qaado tillaabooyinka ku habboon si loo hubiyo in habka loo sameeyay si taxadar leh oo sax ah.
Heerarka Balaadhinta kulaylka
Caadada u ah wax ka qabashada walxaha kala duwan, ABIS waxay awood u yeelan doontaa inay falanqeyso isku darka si loo hubiyo inay ku habboon tahay.ka dib ilaalinta isku halaynta muddada dheer ee CTE (isku-dhafka balaadhinta kulaylka), iyada oo CTE-da hoose, ay yar tahay suurtogalnimada in godadka lagu dhejiyo ay ku guuldareystaan dabacsanaanta soo noqnoqda ee naxaasta taasoo sameysa isku xirnaanta lakabka gudaha.
Cabbiraadda
Xakamaynta ABIS wareegga wareegga waxaa lagu kordhiyey boqolleyda la og yahay iyadoo la filayo khasaarahan si ay lakabyadu ugu soo noqdaan cabbirkooda sidii loo qaabeeyey ka dib marka wareegga lamination la dhammeeyo.sidoo kale, iyadoo la adeegsanayo talooyinka cabbiraadda aasaasiga ah ee saaraha laminateerka oo ay weheliso xogta habraaca tirakoobka ee guriga dhexdiisa, si loo garaaco qodobbada cabbirka ee socon doona muddo ka dib gudaha deegaanka wax soo saarka ee gaarka ah.
Makiinada
Marka la gaaro wakhtiga lagu dhisayo PCB-gaaga, ABIS iska hubi inaad dooratay inaad haysato qalabka saxda ah iyo waayo-aragnimada aad si sax ah ugu soo saari karto isku dayga ugu horreeya.
Bandhiga Alaabta & Qalabka PCB
PCB adag, PCB dabacsan, PCB adag-Flex, HDI PCB, PCB Assembly
Hadafka tayada ABIS
LIISKA qalabka horumarsan
| Tijaabada AOI | Hubi in jeegagga koollada alxanka lagu iibiyo ee qaybaha hoos 0201 Hubinta qaybaha maqan, kabista, qaybaha khaldan, polarity |
| Kormeerka raajada | X-Ray waxay bixisaa kormeer heer sare ah oo ah:BGAs/Micro BGAs/Baakadaha miisaanka Chip/Boodhadh qaawan |
| Tijaabada Wareegta | Tijaabada gudaha-wareeg ah waxaa caadi ahaan loo isticmaalaa iyadoo lala kaashanayo AOI yaraynta cilladaha shaqada ee ay sababaan dhibaatooyinka qaybaha. |
| Imtixaan koronto | Hawsha Hormarsan Barnaamijaynta Qalabka TestFlash Tijaabada shaqaynaysa |
Kormeerka IOC ee soo socda
Kormeerka koollada alxanka ee SPI
Kormeerka AOI ee khadka tooska ah
SMT kormeerida maqaalka koowaad
Qiimaynta dibadda
Kormeerka alxanka X-RAY
Qalabka BGA dib u shaqayn
Kormeerka QA
Kaydinta iyo rarida ka-hortagga-static
Puku dacweeyaan 0% cabashada tayada
Dhammaan waaxdu waxay fulisaa sida waafaqsan ISO iyo waaxda laxiriirta waa inay bixiso warbixinta 8D haddii guddi kasta la tirtiro cillad.
Dhammaan looxyada baxaya waa inay ahaadaan 100% elektaroonig ah oo la tijaabiyay, la tijaabiyay cillad la'aanta iyo alxanka.
Muuqaal la baadhay, waxaanu samaynaa kormeerka microsection ka hor inta aan la dhoofin.
Tababar maskaxda shaqaalaha iyo dhaqanka ganacsigeena, ka dhig inay ku farxaan shaqadooda iyo shirkadeena, waxay ku caawinaysaa inay soo saaraan alaab tayo wanaagsan leh.
Qalab cayriin oo tayo sare leh (Shengyi FR4, ITEQ, Taiyo Solder Mask Ink iwm.)
AOI-gu waxa uu baadhi karaa dhammaan qaybaha, looxyada waa la kormeeraa ka dib habsocod kasta
Shahaado
FAQ
Si loo xaqiijiyo xigasho sax ah, hubi inaad ku darto macluumaadka soo socda mashruucaaga:
Buuxi faylasha GERBER oo ay ku jiraan liiska BOM
l Tirada
l Wakhtiga beddelka
l Shuruudaha Gudbinta
l Shuruudaha Agabka
l Dhamaystir shuruudaha
Qiimahaada gaarka ah waxaa lagu soo gudbin doonaa 2-24 saacadood oo kaliya, iyadoo ku xidhan kakanaanta naqshadaynta.
Macmiil kastaa wuxuu lahaan doonaa iib si uu kula soo xidhiidho.Saacadaha shaqada: Subaxnimo 9:00-PM 19:00 (Waqtiga Beijing) Isniinta ilaa Jimcaha.Waxaan kuugu soo jawaabi doonaa iimaylkaaga sida ugu dhakhsaha badan inta lagu jiro wakhtiga shaqada.Waxa kale oo aad kala xidhiidhi kartaa iibkayaga taleefanka gacanta haddii degdeg ah.
ISO9001, ISO14001, UL USA & USA Canada, IFA16949, SGS, RoHS warbixinta.
Hababkayada Hubinta Tayada sida hoos ku qoran:
a), Kormeerka muuqaalka
b), Baadhitaanka duulista, qalabka lagu rakibo
c) Xakamaynta dhibka
d) Ogaanshaha kartida alxanka
e).
f), AOI (Baaritaanka Indhaha oo Toomaatig ah)
Haa, waanu ku faraxsanahay inaanu bixino muunada moduleka si aanu u tijaabino una hubino tayada, dalabka muunad isku dhafan ayaa diyaar ah.Fadlan ogow iibsadaha waa inuu bixiyaa kharashka dhoofinta.
Heerka gaarsiinta waqtiga ayaa ka badan 95%
a), 24 saacadood oo degdeg ah u leexo labada dhinac ee PCB
b), 48 saacadood 4-8 lakab oo ah nooca PCB
c), 1 saac oo xigasho
d), 2 saacadood oo loogu talagalay su'aalaha injineernimada / jawaab celinta cabashada
e), 7-24 saacadood ee taageerada farsamada/dalabka adeegga / hawlgallada wax soo saarka
ABIS waligeed ma dooran amarrada.Labada amarrada yaryar iyo dalabaadka tirada badanba waa la soo dhawaynayaa waxaana ABIS noqon doonaa si dhab ah oo masuul ah, waxaanu ugu adeegi doonaa macaamiisha tayo iyo tiro ahaanba.
ABlS waxay qabataa 100% muuqaal iyo kormeer AOl iyo sidoo kale samaynta tijaabinta korantada, tijaabinta korantada sare, tijaabada xakamaynta xakamaynta, qayb yar oo ka mid ah, tijaabinta shoogga kulaylka, tijaabinta alxanka, tijaabinta isku halaynta, tijaabinta caabbinta dahaarka, tijaabada nadaafadda ionic iyo tijaabinta PCBA.
a), Xigasho 1 saac ah
b), 2 saacadood oo jawaab celin cabasho ah
c), 7*24 saac taageero farsamo
d), 7*24 adeeg dalbashada
e), 7*24 saac gaarsiinta
f),7*24 wax soo saar
| Awoodda wax soo saarka ee alaabta iibka kulul | |
| Aqoon-is-weydaarsiga PCB-ga ee laba-geesoodka ah | Aluminium PCB Workshop |
| Karti Farsamo | Karti Farsamo |
| Qalabka ceeriin: CEM-1, CEM-3, FR-4 (High TG), Rogers, TELFON | Qalabka ceeriin: Saldhig aluminium, saldhigga naxaasta |
| Lakab: 1 lakab ilaa 20 lakab | Lakabka: 1 lakab iyo 2 lakab |
| Balaadhka khadka ugu yar: 3mil/3mil(0.075mm/0.075mm) | Balaadhka khadka ugu yar: 4mil/4mil(0.1mm/0.1mm) |
| Daloolkii ugu yaraa: 0.1mm (dalool dalool) | Min.Cabbirka daloolka: 12mil (0.3mm) |
| Max.Cabbirka looxa: 1200mm* 600mm | Cabbirka ugu sarreeya: 1200mm* 560mm(47in* 22in) |
| Dhumucdiisuna waxay dhammaatay: 0.2mm- 6.0mm | Dhumucdiisuna waxay dhammaatay: 0.3 ~ 5mm |
| Dhumucdiisuna waxay tahay xaashida naxaasta ah: 18um ~ 280um (0.5oz ~ 8oz) | Dhumucdiisuna waxay tahay 35um ~ 210um (1oz ~ 6oz) |
| Dulqaadka NPTH: +/- 0.075mm, Dulqaadka PTH: +/- 0.05mm | Dulqaadka booska daloolka: +/- 0.05mm |
| Dulqaadka dulucda: +/- 0.13mm | Dulqaadka dulsaarka dariiqa: +/ 0.15mm;Dulqaadka dulucda feerka:+/ 0.1mm |
| Dusha sare ayaa dhammaatay: HASL-ka-free-lead, Dahab immersion(ENIG), qalin immersion, OSP, dahaadh dahab ah, far dahab ah, Kaarboon INK. | Dusha sare ayaa dhammaatay: HASL bilaash ah, dahab immersion (ENIG), qalin immersion, OSP iwm |
| Dulqaadka xakamaynta xakamaynta: +/- 10% | U dulqaadashada dhumucda hadhaa: +/- 0.1mm |
| Awood wax soo saar: 50,000 sqm / bishii | Awoodda Wax-soo-saarka MC PCB: 10,000 sqm/bishii |
