La cusboonaysiin karo 6 Lakabyo Adag-Flex PCB Board oo leh 3.0oz Copper iyo ENIG 2u
Macluumaadka aasaasiga ah
| Qaabka No. | PCB-A35 |
| Xidhmada gaadiidka | Xirmooyinka vacuum |
| Shahaado | UL,ISO9001&ISO14001,RoHS |
| Qeexitaanno | IPC Class2 |
| Meesha ugu yar/khadka | 0.075mm/3mil |
| Xakamaynta caqabada | 50± 10% |
| Awood-soo-saarka | 720,000 M2/Sanadkii |
| Asal ahaan | Lagu sameeyay Shiinaha |
Sharaxaada Alaabta
Dulmarka looxa wareegyada daabacan ee adag
Macnaha dhabta ah ee "fudud-flex" waa isku darka faa'iidooyinka looxyada dabacsan iyo kuwa adag labadaba.Waxaa loo arkaa in laba-in-mid wareeg ah ay isku xiran yihiin iyada oo loo marayo godadka dhejiska ah.Wareegyada qallafsan ee adag ayaa awood u siinaya cufnaanta qaybaha sare iyada oo ku habboon meelo xaddidan oo qaabaysan.
Looxyada daabacan ee adag-flex waxay ka kooban yihiin lakabyo badan oo wareeg ah oo dabacsan oo gudaha ah si la xusho iyadoo la adeegsanayo filim xidhidhiyaha pre-preg epoxy, oo la mid ah wareegyo dabacsan oo badan.Wareegyo qallafsan oo adag ayaa loo adeegsaday militariga iyo warshadaha hawada hawada in ka badan 20 sano.Inta badan looxa wareegyada dabacsan ee adag.
Farsamo & Karti
| Shayga | Awood-soo-saarka |
| Tirada lakabka | 1-32 |
| Qalab | FR-4, High TG FR-4, PTFE, Aluminium Base, Cu saldhigga, Rogers, Teflon, iwm |
| Cabirka ugu badan | 600mm x1200mm |
| Dulqaadka dulucda guddiga | ± 0.13mm |
| Dhumucda looxa | 0.20mm--8.00mm |
| Dulqaadka Dhumucda (t≥0.8mm) | ± 10% |
| Dufanka Dufanka (t <0.8mm) | ±0.1mm |
| Lakabka dahaarka Thickncss | 0.075mm--5.00mm |
| Iine ugu yar | 0.075mm |
| Meesha ugu yar | 0.075mm |
| Lakabka ka baxay Dhumucda Copper | 18um--350um |
| Lakabka Gudaha Dhumucda Naxaasta | 17um--175um |
| Daloolka Qodista ( Makaanikada) | 0.15mm--6.35mm |
| Dhammaystirka Godka ( Makaanikada) | 0.10mm--6.30mm |
| Dulqaadka Dhexroorka (Mashiinka) | 0.05mm |
| Diiwaangelinta | 0.075mm |
| Saamiga Aspecl | 16:01 |
| Nooca Maaskarada Alxan | LPI |
| SMT Mini.Balacda Maaskarada Alxan | 0.075mm |
| Nadiifinta Maaskarada Mini | 0.05mm |
| Dhererka godka | 0.25mm--0.60mm |
| Dulqaadashada Xakamaynta Culayska | 10% |
| Dhamaystir dusha sare | HASL/HASL-LF, ENIG, Daasadda Immersion/Silver, Dahab Fiish ah, OSP , Far Dahab ah, Dahab Adag |
Karti wax-soo-saar - (Flex)
| alaabta | unug | ||||||
| lakabyada ugu badan | Lakabka | 10 | |||||
| Qalabka Saldhigga (Polymide) | μm | 9, 12, 18, 35, 70 | |||||
| bireed naxaas ah | μm | 18,35,70 | |||||
| Dabool (Polymide) | μm | 27.5, 37.5, 50, 75 | |||||
| Sibidhka heerkulbeegga | μm | 13, 25 | |||||
| Cabbirka guddiga ugu sarreeya | mm | 250*800 | 250*1500 ee 10 lakab | ||||
| Cabbirka guddiga ugu yar | mm | Waxay kuxirantahay macmiilka | |||||
| Dhumucda looxa Dhamaystiran ee ugu badan | mm | 0.7 | |||||
| Dhumucda looxa dhammayn ee ugu yar | mm | 0.057mm | |||||
| Dulqaadashada cabbirka godka | mm | ±0.05mm | |||||
| Daloolka ugu Yar | mm | 0.1mm | |||||
| Ugu Yar ee loo maro suufka daloolka | mm | 0.3mm | 0.25mm Gaar ahaan | ||||
| Dhumucda ugu badan ee saldhiga | OZ | 2 | |||||
| Dhumucda Naxaasta Saldhiga Ugu Yar | OZ | 1/4 | |||||
| Dhumucda Naxaasta | μm | 8-20 | |||||
| Dhumucda naxaasta ee PTH | μm | 8 ~ 20 | |||||
| Balaadhka/Barafaynta Khadka Ugu Yar | mm | 0.05 | |||||
| Dusha la dhameeyay | / | Ni,Au,Sn | |||||
Waqtiga Hogaaminta PCB ee dabacsan
| Dufcad yarMugga ≤1 mitir sq | Maalmaha Shaqada | Wax-soo-saarka guud | Maalmaha Shaqada |
| Hal-dhinac | 3-4 | Hal-dhinac | 8-10 |
| 2-4 lakab | 4-5 | 2-4 lakab | 10-12 |
| 6-8 lakab | 10-12 | 6-8 lakab | 14-18 |
Faa'iidooyinka ABIS
- Qalabka-dhamaadka sare-xawaare sare leh Mashiinnada Xulo iyo Meelaynta kuwaas oo farsamayn kara ilaa 25,000 qaybaha SMD saacaddii
- Awood tayo sare leh oo tayo sare leh 60K Sqm bishiiba-Waxay bixisaa mugga hoose iyo wax soo saarka PCB-da ee baahida loo qabo, sidoo kale wax soo saar ballaaran
- Kooxda injineernimada xirfadlayaasha-40 injineerada iyo gurigooda qalabaynta, xoog leh OEM.Waxay bixisaa laba ikhtiyaar oo fudud: Aqoonta gaarka ah iyo Heerka-Qoto dheer ee IPC Class II iyo III Heerarka
Waxaan siinaa adeeg furaha EMS-ka ah macaamiisha doonaya inaan PCB-ga ku ururinno PCBA, oo ay ku jiraan prototypes, mashaariicda NPI, mugga yar iyo kuwa dhexe.Waxaan sidoo kale awoodnaa inaan ka soo saarno dhammaan qaybaha mashruucaaga isku-xidhka PCB.Injineeradayada iyo kooxda wax soo saarka waxay leeyihiin khibrad qani ah oo ku saabsan silsiladda sahayda iyo warshadaha EMS, oo leh aqoon qoto dheer oo ku jirta golaha SMT oo noo ogolaanaysa inaan xallino dhammaan arrimaha wax soo saarka.Adeegeenu waa mid kharash-ool ah, dabacsanaan, oo la isku halayn karo.Waxaan ku qanacnay macaamiisheeda warshado badan oo ay ka mid yihiin caafimaadka, warshadaha, baabuurta, iyo elektiroonigga macaamiisha.
Shahaado
FAQ
Warshadaha ugu waaweyn ABIS: Xakamaynta Warshadaha, Isgaarsiinta, Alaabooyinka Baabuurta iyo Caafimaadka.Suuqa Weyn ee ABIS: 90% Suuqa Caalamiga ah (40%-50 ee USA, 35% Yurub, 5% Russia iyo 5% -10% ee Bariga Aasiya) iyo 10% Suuqa Gudaha.
Alaab-qeybiyeyaasha ugu muhiimsan (FR4): Kingboard (Hong Kong), NanYa (Taiwan), iyo Shengyi (Shiinaha), haddii kuwa kale, fadlan RFQ.
Hababkayada Hubinta Tayada sida hoos ku qoran:
a), Kormeerka muuqaalka
b), Baadhitaanka duulista, qalabka lagu rakibo
c) Xakamaynta dhibka
d) Ogaanshaha kartida alxanka
e), Mikroskoob-ka birta ah ee dhijitaalka ah
f), AOI (Baaritaanka Indhaha oo Toomaatig ah)
Guud ahaan 2-3 maalmood si muunad loo sameeyo.Waqtiga hogaanka wax soo saarka guud wuxuu ku xirnaan doonaa tirada dalabka iyo xilliga aad dalbatay.
Hababkayada Hubinta Tayada sida hoos ku qoran:
a), Kormeerka muuqaalka
b), Baadhitaanka duulista, qalabka lagu rakibo
c) Xakamaynta dhibka
d) Ogaanshaha kartida alxanka
e), Mikroskoob-ka birta ah ee dhijitaalka ah
f), AOI (Baaritaanka Indhaha oo Toomaatig ah)
ABlS waxay qabataa 100% muuqaal iyo kormeer AOl iyo sidoo kale samaynta tijaabinta korantada, tijaabinta korantada sare, tijaabinta xakamaynta impedance, qaybta-yaraha, tijaabada shoogga kulaylka, tijaabada alxanka, tijaabinta isku halaynta, tijaabinta iska caabbinta, tijaabinta nadaafadda ioniciyo PCBA functional test.
ABlS waxay qabataa 100% muuqaal iyo kormeer AOl iyo sidoo kale samaynta tijaabinta korantada, tijaabinta korantada sare, tijaabada xakamaynta xakamaynta, qayb yar oo ka mid ah, tijaabinta shoogga kulaylka, tijaabinta alxanka, tijaabinta isku halaynta, tijaabinta caabbinta dahaarka, tijaabada nadaafadda ionic iyo tijaabinta PCBA.
ABIS ma laha shuruudaha MOQ ee PCB ama PCBA midkood.
Heerka gaarsiinta waqtiga ayaa ka badan 95%
a), 24 saacadood oo degdeg ah u leexo labada dhinac ee PCB
b), 48 saacadood 4-8 lakab oo ah nooca PCB
c), 1 saac oo xigasho
d), 2 saacadood oo loogu talagalay su'aalaha injineernimada / jawaab celinta cabashada
e), 7-24 saacadood ee taageerada farsamada/dalabka adeegga / hawlgallada wax soo saarka
