6 Lakab FR4 HDI PCB Circuit oo ku jira 2oz naxaas ah oo leh dusha sare ee Immersion
Macluumaadka aasaasiga ah
| Qaabka No. | PCB-A12 |
| Xidhmada gaadiidka | Xirmooyinka vacuum |
| Shahaado | UL,ISO9001&ISO14001,RoHS |
| Codsiga | Elektrooniga macaamiisha |
| Meesha ugu yar/khadka | 0.075mm/3mil |
| Awood-soo-saarka | 50,000 sqm/bishii |
| Koodhka HS | 853400900 |
| Asal ahaan | Lagu sameeyay Shiinaha |
Sharaxaada Alaabta
HDI PCB Hordhac
HDI PCB waxaa lagu qeexaa sida looxa wareeg ee daabacan oo leh cufnaanta fiilooyinka ka sarreeya aag kasta marka loo eego PCB-ga caadiga ah.Waxay leeyihiin khadad aad u qurux badan iyo meelo bannaan, fiisooyin yaryar iyo suufyo qabasho, iyo cufnaanta suufka isku xirka ee ka sarreeya marka loo eego kuwa ka shaqeeya farsamada PCB ee caadiga ah.HDI PCB-yada waxaa lagu sameeyaa microvias, fiisooyin la aasay iyo lamination taxane ah oo leh qalab dahaar ah iyo fiilooyinka kirishbooyada ee cufnaanta sare ee marinka.
Codsiyada
HDI PCB waxa loo isticmaalaa in lagu dhimo cabbirka iyo miisaanka, iyo sidoo kale in kor loogu qaado waxqabadka korantada ee qalabka.HDI PCB waa beddelka ugu fiican ee loox-tirinta sare leh iyo laminate caadiga ah ee qaaliga ah ama looxyada si isdaba joogga ah loo dahaadhay.HDI waxay ku daraysaa indhoolayaal la aasay oo la aasay kuwaas oo gacan ka geysanaya badbaadinta hantida maguurtada ah ee PCB iyadoo u oggolaanaysa sifooyin iyo khadadka in lagu nashqadeeyo kor ama ka hooseeya iyaga oo aan la samayn xidhiidh.Qaar badan oo ka mid ah garoonnada wanaagsan ee BGA-ga maanta iyo raad-raacyada qaybta flip-chip ma oggola in la dhex maro raadadka u dhexeeya suufka BGA.Indho la'aanta iyo fiilooyinka la aasay waxay kaliya isku xiri doonaan lakabyada u baahan isku xirka aaggaas.
Farsamo & Karti
| Shayga | Awood-soo-saarka |
| Tirada lakabka | 1-20 lakab |
| Qalab | FR-4, CEM-1/CEM-3, PI, High Tg, Rogers, PTEF, Alu/Cu Base, iwm |
| Dhumucda looxa | 0.10mm-8.00mm |
| Cabirka ugu badan | 600mmX1200mm |
| Dulqaadka dulucda guddiga | +0.10mm |
| Dulqaadka Dhumucda (t≥0.8mm) | ± 8% |
| Dulqaadashada Dhumucda (t<0.8mm) | ± 10% |
| Dhumucda lakabka dahaarka | 0.075mm--5.00mm |
| Khadka ugu yar | 0.075mm |
| Meesha ugu yar | 0.075mm |
| Lakabka ka baxay Dhumucda Copper | 18um--350um |
| Lakabka Gudaha Dhumucda Naxaasta | 17um--175um |
| Daloolka Qodista ( Makaanikada) | 0.15mm--6.35mm |
| Dhammaystirka Godka ( Makaanikada) | 0.10mm-6.30mm |
| Dulqaadka Dhexroorka (Mashiinka) | 0.05mm |
| Diiwaangelinta | 0.075mm |
| Saamiga dhinaca | 16:1 |
| Nooca Maaskarada Alxan | LPI |
| SMT Mini.Balacda Maaskarada Alxan | 0.075mm |
| MiniNadiifinta Maaskarada Alxan | 0.05mm |
| Dhererka godka | 0.25mm--0.60mm |
| Dulqaadashada xakamaynta caqabada | ± 10% |
| Dhammaadka/daawaynta dusha sare | HASL, ENIG, Chem, Tin, Flash Gold, OSP, Far dahab ah |
Habka Waxsoosaarka PCB
Nidaamku wuxuu ka bilaabmaa qaabaynta Qaabka PCB-ga iyadoo la adeegsanayo barnaamij kasta oo PCB nashqadeynaya / Qalabka CAD (Proteus, Eagle, Ama CAD).
Dhammaan tallaabooyinka soo haray waa Habka Wax-soo-saarka ee Guddiga Wareegga Daabacan ee Adag waxay la mid yihiin PCB-ga Hal dhinac ah ama PCB-ga laba-geesoodka ah ama PCB-da lakabka badan.
Wakhtiga Hogaaminta Q/T
| Qaybta | Waqtiga Hogaaminta ugu Dhakhsaha badan | Waqtiga Hogaaminta Caadiga ah |
| Laba-dhinac | 24 saac | 120 saac |
| 4 Lakabyo | 48 saac | 172 saac |
| 6 Lakabyo | 72 saac | 192 saac |
| 8 Lakabyo | 96 saac | 212 saac |
| 10 Lakab | 120 saac | 268 saac |
| 12 lakab | 120 saac | 280 saac |
| 14 Lakab | 144 saac | 292 saac |
| 16-20 lakab | Waxay kuxirantahay shuruudaha gaarka ah | |
| In ka badan 20 lakab | Waxay kuxirantahay shuruudaha gaarka ah | |
Dhaqdhaqaaqa ABIS ee lagu xakameynayo FR4 PCBS
Diyaarinta godka
Ka-saarista qashinka si taxadar leh & hagaajinta cabbirada mishiinka: ka hor inta aanad ku dhejin naxaas, ABIS waxay si taxadar leh u fiirisaa dhammaan godadka FR4 PCB ee lagu daweeyey si looga saaro qashinka, cilladaha dusha sare, iyo smear epoxy, godadka nadiifka ah waxay hubiyaan in dahaadhku si guul leh ugu dheggan yahay derbiyada daloolka. .sidoo kale, horraantii habka, cabbirada mishiinka daloolka ayaa si sax ah loo hagaajiyaa.
Diyaarinta Dusha sare
Si taxaddar leh uga-hortagga: Shaqaalaheenna tignoolajiyada khibradda leh waxay ogaan doonaan waqti ka hor in habka kaliya ee looga fogaado natiijada xun ay tahay in la saadaaliyo baahida loo qabo maaraynta gaarka ah iyo in la qaado tillaabooyinka ku habboon si loo hubiyo in habka loo sameeyay si taxadar leh oo sax ah.
Heerarka Balaadhinta kulaylka
Caadada u ah wax ka qabashada walxaha kala duwan, ABIS waxay awood u yeelan doontaa inay falanqeyso isku darka si loo hubiyo inay ku habboon tahay.ka dib ilaalinta isku halaynta muddada dheer ee CTE (isku-dhafka balaadhinta kulaylka), iyada oo CTE-da hoose, ay yar tahay suurtogalnimada in godadka lagu dhejiyo ay ku guuldareystaan dabacsanaanta soo noqnoqda ee naxaasta taasoo sameysa isku xirnaanta lakabka gudaha.
Cabbiraadda
Xakamaynta ABIS wareegga wareegga waxaa lagu kordhiyey boqolleyda la og yahay iyadoo la filayo khasaarahan si ay lakabyadu ugu soo noqdaan cabbirkooda sidii loo qaabeeyey ka dib marka wareegga lamination la dhammeeyo.sidoo kale, iyadoo la adeegsanayo talooyinka cabbiraadda aasaasiga ah ee saaraha laminateerka oo ay weheliso xogta habraaca tirakoobka ee guriga dhexdiisa, si loo garaaco qodobbada cabbirka ee socon doona muddo ka dib gudaha deegaanka wax soo saarka ee gaarka ah.
Makiinada
Marka la gaaro wakhtiga lagu dhisayo PCB-gaaga, ABIS iska hubi inaad dooratay inaad haysato qalabka saxda ah iyo waayo-aragnimada aad ku soo saari karto
Hadafka tayada ABIS
Heerka gudbinta walxaha soo galaya ayaa ka sarreeya 99.9%, tirada diidmada guud ee ka hooseeya 0.01%.
Xarumaha ABIS ee la shaabadeeyay waxay xakameeyaan dhammaan hababka muhiimka ah si loo baabi'iyo dhammaan arrimaha suurtagalka ah ka hor inta aan la soo saarin.
ABIS waxay isticmaashaa software horumarsan si ay u samayso falanqayn ballaaran oo DFM ah oo ku saabsan xogta soo socota, waxayna isticmaashaa nidaamyada xakamaynta tayada horumarsan inta lagu jiro habka wax soo saarka.
ABIS waxay qabataa 100% muuqaal iyo kormeer AOI iyo sidoo kale samaynta tijaabinta korantada, tijaabinta tamarta sare, tijaabinta xakamaynta impedance, qayb yar oo ka mid ah, tijaabinta shoogga kulaylka, tijaabinta alxanka, tijaabinta isku halaynta, tijaabinta caabbinta dahaarka iyo tijaabada nadaafadda ionic.
Shahaado
FAQ
Badi iyaga oo ka socda Shengyi Technology Co., Ltd. (SYTECH), kuwaas oo ahaa soo saaraha labaad ee CCL ee ugu weyn adduunka marka loo eego mugga iibka, laga bilaabo 2013 ilaa 2017. Waxaan aasaasay xiriirka muddada dheer ee iskaashiga ilaa 2006. Qalabka resin FR4 (Model S1000-2, S1141, S1165, S1600) ayaa inta badan loo isticmaalaa samaynta loox wareegyada daabacan oo hal iyo laba-dhinac ah iyo sidoo kale loox-lakabyo badan.Halkan waxaa ku qoran faahfaahinta tixraacaada.
Loogu talagalay FR-4: Sheng Yi, King Board, Nan Ya, Polycard, ITEQ, ISOLA
Loogu talagalay CEM-1 & CEM 3: Sheng Yi, King Board
Soo noqnoqoshada Sare: Sheng Yi
Daawada UV: Tamura, Chang Xing (* Midabka la heli karo: Cagaaran) Alxanka dhinaca
Sawirka dareeraha ah: Tao Yang, iska caabin (filimka qoyan)
Chuan Yu (* Midabada la heli karo: Cadaan, Jaalle la qiyaasi karo Alxanka, Purple, Cas, Buluug, Cagaaran, Madow)
Xigasho 1 saac
b), 2 saacadood oo jawaab celin cabasho ah
c), 7*24 saac taageero farsamo
d), 7*24 adeeg dalbashada
e), 7*24 saac gaarsiinta
f),7*24 wax soo saar
Maya, ma aqbali karno faylalka sawirka, haddii aadan haysan faylka Gerber, ma noo soo diri kartaa muunad si aan u koobiyeeyo.
PCB&PCBA Habka koobiga:
Hababkayada Hubinta Tayada sida hoos ku qoran:
a), Kormeerka muuqaalka
b), Baadhitaanka duulista, qalabka lagu rakibo
c) Xakamaynta dhibka
d) Ogaanshaha kartida alxanka
e).
f), AOI (Baaritaanka Indhaha oo Toomaatig ah)
Lagu hubiyay 12 saacadood gudahoodMarka la hubiyo su'aasha Engineerka iyo faylka shaqada, waxaan bilaabi doonaa wax soo saarka.
Hareerahaaga eeg.Sidaas awgeed badeecooyin badan ayaa ka yimaada Shiinaha.Sida cad, tani waxay leedahay dhowr sababood.Hadda maaha wax ku saabsan qiimaha.
Diyaarinta xigashooyinka si dhakhso ah ayaa loo sameeyaa.
Dalabka wax soo saarka si degdeg ah ayaa loo dhammeeyaa.Waxaad qorshayn kartaa dalabaadka la qorsheeyay bilo ka hor, waxaanu diyaarin karnaa isla markiiba marka PO la xaqiijiyo.
Silsiladda sahayda ayaa si weyn loo ballaariyay.Taasi waa sababta aan si degdeg ah uga iibsan karno qayb kasta lammaane khaas ah.
Shaqaale dabacsan oo xamaasad leh.Natiijo ahaan, waxaan aqbalnaa amar kasta.
24 adeegga khadka ee baahida degdegga ah.Saacadaha shaqada ee +10 saacadood maalintii.
Qiimaha hoose.Kharash qarsoon ma jiro.Ku badbaadi shaqaalaha, saadka iyo saadka.
ABIS ma laha shuruudaha MOQ ee PCB ama PCBA midkood.
ABlS waxay qabataa 100% muuqaal iyo kormeer AOl iyo sidoo kale samaynta tijaabinta korantada, tijaabinta korantada sare, tijaabada xakamaynta xakamaynta, qayb yar oo ka mid ah, tijaabinta shoogga kulaylka, tijaabinta alxanka, tijaabinta isku halaynta, tijaabinta caabbinta dahaarka, tijaabada nadaafadda ionic iyo tijaabinta PCBA.
ABIS ma laha shuruudaha MOQ ee PCB ama PCBA midkood.
| Awoodda wax soo saarka ee alaabta iibka kulul | |
| Aqoon-is-weydaarsiga PCB-ga ee laba-geesoodka ah | Aluminium PCB Workshop |
| Karti Farsamo | Karti Farsamo |
| Qalabka ceeriin: CEM-1, CEM-3, FR-4 (High TG), Rogers, TELFON | Qalabka ceeriin: Saldhig aluminium, saldhigga naxaasta |
| Lakab: 1 lakab ilaa 20 lakab | Lakabka: 1 lakab iyo 2 lakab |
| Balaadhka khadka ugu yar: 3mil/3mil(0.075mm/0.075mm) | Balaadhka khadka ugu yar: 4mil/4mil(0.1mm/0.1mm) |
| Daloolkii ugu yaraa: 0.1mm (dalool dalool) | Min.Cabbirka daloolka: 12mil (0.3mm) |
| Max.Cabbirka looxa: 1200mm* 600mm | Cabbirka ugu sarreeya: 1200mm* 560mm(47in* 22in) |
| Dhumucdiisuna waxay dhammaatay: 0.2mm- 6.0mm | Dhumucdiisuna waxay dhammaatay: 0.3 ~ 5mm |
| Dhumucdiisuna waxay tahay xaashida naxaasta ah: 18um ~ 280um (0.5oz ~ 8oz) | Dhumucdiisuna waxay tahay 35um ~ 210um (1oz ~ 6oz) |
| Dulqaadka NPTH: +/- 0.075mm, Dulqaadka PTH: +/- 0.05mm | Dulqaadka booska daloolka: +/- 0.05mm |
| Dulqaadka dulucda: +/- 0.13mm | Dulqaadka dulsaarka dariiqa: +/ 0.15mm;Dulqaadka dulucda feerka:+/ 0.1mm |
| Dusha sare ayaa dhammaatay: HASL-ka-free-lead, Dahab immersion(ENIG), qalin immersion, OSP, dahaadh dahab ah, far dahab ah, Kaarboon INK. | Dusha sare ayaa dhammaatay: HASL bilaash ah, dahab immersion (ENIG), qalin immersion, OSP iwm |
| Dulqaadka xakamaynta xakamaynta: +/- 10% | U dulqaadashada dhumucda hadhaa: +/- 0.1mm |
| Awood wax soo saar: 50,000 sqm / bishii | Awoodda Wax-soo-saarka MC PCB: 10,000 sqm/bishii |
